Air Framers Module 1 Practice Exam

These questions are part of the practice quiz. Start practicing

• Combustible liquids are described as liquids with which flash point range?
• Never permit what in HAZMAT stowage areas?
• What is the purpose of the Authorized Use List (AUL)?
• NALCOMIS stands for?
• An Illustrated Parts Breakdown (IPB) manual contains what kind of listing?
• What does NADEP stand for in naval aviation maintenance?
• Why should Cannon plug pliers not be used to install connection plugs?
• The NAVAIR 00-500A index links equipment designations to what?
• If tool boxes are not fit for etching, what procedure applies?
• NMCS means?
• What does Will indicate?
• What is the purpose of Phase Maintenance Requirements Cards (PMRC)?
• An Allen wrench is designed to remove or install which type of fastener?
• In TMINS, what does PI stand for?
• The sliding T handle is primarily used for what operation?
• The MCN is a seven-character alphanumeric code assigned by the system. What does it track through the maintenance process?
• What is the turboelectric effect?
• What do Maintenance Instruction Manuals (MIMs) contain?
• Which document is used to document maintenance actions and display those actions on a VIDS board when NALCOMIS is not available?
• What PPE must be worn when working with tools that may cause flying debris or hearing loss?
• Which of the following are general functions of depot-level maintenance?
• Which statement is true about universal joints?
• Which of the following is a type of Maintenance Requirement Card?
• Which is NOT one of the two major types of Technical Manuals?
• Which inspection type is conducted during unusual situations such as weather or wildlife?
• Which position is the principal advisor to the CO on Ground Safety matters?
• NALCOMIS provides OMAs and IMAs with what type of system?
• What is a main purpose of pliers?
• Changes to the NAMP
• Which item is included among PMS publication types that SDLM/PDM specifications belong to?
• Which two blocks on the Maintenance Action Form contain narrative descriptions of the discrepancy and the corrective action?
• Improper usage or storage of tools can result in what?
• Four types of change are IRAC, RAC, Change, and Revision. Which list correctly includes all four?
• Easy reach means keeping tools where they cannot fall and are easy to reach. Which option best represents this idea?
• What is the designation of the NATOPS Conventional Weapons Handling Procedures Manual (ASHORE)?
• Which item is included in the Monthly Maintenance Plan?
• ASPA is described as a subset of which maintenance approach?
• Which outcomes are associated with electrostatic discharge (ESD)?
• Which component is described as having grooved jaws, a rod gripping section, and a cutting edge?
• Which PPE category provides protection against chemicals that can damage your skin?
• What feature distinguishes Cannon plug pliers from standard adjustable pliers?
• Which term describes a routine manual change and release of updated manual pages?
• EMI stands for what?
• For each IPB part, which data combination is listed?
• Proper storage means keeping each tool where?
• Which item follows the Title Page in the Work Package Manual organization?
• In summary, improper tool handling can lead to what?
• NIIN stands for?
• A liquid with a flash point of 150 F would be classified as which type under the given descriptions?
• What does Partial Mission Capable Supply (PMCS) indicate about an aircraft?
• ASPA stands for what?
• When NALCOMIS is unavailable, what is used as a back-up for documentation?
• What is the key difference when VIDS/MAF is used with NALCOMIS compared to its use with the VIDS board?
• Change is defined as which of the following?
• How long is a turnaround inspection valid?
• How are Maintenance Instruction Manuals (MIMs) prepared?
• In the NAVAIR Conventional Numbering System, what does Part 3 identify?
• Maintenance Manuals primarily describe which aspects?
• Which statement best describes the purpose of the Naval Aviation Safety program?
• What is an Illustrated Parts Breakdown (IPB) in these manuals?
• Transfer inspections occur whenever what happens?
• Which statement correctly identifies the NSN composition?
• Silhouetted refers to which concept in tool organization?
• What is the primary function of a combination wrench?
• Who initiates a 'Lost tool report' when a tool is not found?
• What is the purpose of the Naval Aviation Maintenance Program (NAMP)?
• EXREP (Expeditious Repair) is a supply and repair status assigned when?
• Which statement best describes Rework maintenance?
• Which two codes serve as bases for maintenance data reporting and maintenance control procedures?
• Rework is performed with which personnel and managed by which organization?
• Screwdrivers are used for
• Which list outlines what items can be repaired, how they are repaired, and the responsible work center?
• Periodic Maintenance Information Cards (PMIC) are used to track components with what requirement?
• Which accessory changes drive sizes to fit different sockets?
• Conventional Manual Organization is described as having chapters and sections. Which of the following is a named chapter?
• A Deviation is defined as?
• What is the responsibility of the Division Officers?
• Are TMINS numbers used for requisitioning?
• What is the primary purpose of NATOPS manuals?
• Which statement best describes the Monthly Maintenance Plan's distribution and purpose?
• On MRCs, the letters 'QA' indicate tasks that require witness by which roles?
• What is the lowest level of maintenance tasked with keeping assigned aircraft equipment in a full mission capable status while continually improving local maintenance processes?
• Which code identifies the system or subsystem being worked upon?
• Screwdrivers should NOT be used as
• In intermediate maintenance activities, production control will
• In TMINS, what does the Publication Identifier (PI) pertain to?
• IPB illustrations are exploded views referenced to listings by SM&R code listings in what order?
• How is a security classification suffix indicated in TMINS?
• The Job Control Number (JCN) is a 9, 10, or 11 character code that serves as a base for which activities?
• Which are the official distribution formats for technical manuals?
• What is the primary function of safety wire pliers?
• How many types of pliers are there?
• Under what condition is the aircraft or support equipment allowed to be released?
• Which format is used for maintenance manuals delivered on laptop toughbooks?
• What is the role of the Safety Petty Officer or Safety NCO?
• The 12-point is more common on box-end wrenches and may be used on both square and hexagonal bolt heads. Which statement best describes this feature?
• Which three elements constitute the EMI triangle?
• Maintenance Requirements Cards are organized according to which criterion?
• Who ensures that personnel within a division comply with all safety instructions?
• You can contribute to manual changes through which system?
• Which maintenance concept does ASPA relate to as a subset?
• Which statement best defines EMI?
• When a discrepancy is found, the work order is initiated using which system?
• What is a key safety reason to segregate incompatible chemicals?
• In the NAVAIR Conventional Numbering System, what does Part 2 identify?
• In an IPB, which data item is included?
• Open-end wrench length is determined by
• Who serves as the principal advisor to the CO on all aviation safety matters?
• What defines a Technical Manual?
• What is the main purpose of outlining a tool's location (silhouetted) in a tool control system?
• The NAMP is identified as which document?
• TMINS applies to manuals published by which entities?
• Who provides the Safety Data Sheet (SDS) for a chemical product?
• Which tool is specifically described as being suitable for use in confined areas to hold objects where fingers cannot reach?
• Which statement best describes Organizational Maintenance Activity (OMA)?
• One of the benefits of the TCP is the enhancement of safety by eliminating which of the following?
• Daily inspections are designed to inspect for defects to a greater depth than the turnaround inspection and are valid for up to how many hours?
• Interim change
• What is the formal name of the report filed when a tool cannot be located?
• Which item is included as a standard chapter in the Conventional Manual Organization?
• Conditional inspections are conducted for what reason?
• The MDS is a computer database used to document what?
• What is the Naval Aeronautical Publications Index Equipment Applicability List (NAVAIR 00-500A)?
• The NATOPS Conventional Weapons Handling Procedures Manual (ASHORE) addresses safety for handling conventional aircraft weapons in which environment?
• What does the discrepancy block contain?
• Material control shall
• Failure to collect tools from aircraft and support equipment may cause?
• Locking pliers are described as being able to hold objects regardless of what?
• What best defines a Safe Area in the workplace?
• Which of the following is a general function of depot-level maintenance?
• Flammable liquids are defined as liquids that have which of the following properties?
• In the NAVAIR Conventional Numbering System, what does Part 1 designate?
• What does Caution indicate?
• What is the objective of NALCOMIS?
• General Aircraft Information manuals describe which topic as part of their content?
• What does a Change refer to in NAMP terminology?
• Phillips (Cross Tip) screwdrivers are designed for screws with
• VIDS/MAF is a multi-purpose document used in the MDS and VIDS to document what?
• The length of the socket does not determine the size. Which statement is correct?
• What topics do NATOPS manuals cover?
• What is the role of the Department Heads regarding safety?
• CD-ROM distributed manuals must have which features?
• What is the objective of the NAMP?
• What does Should indicate?
• How is the WP manual numbering system structured?
• The box end wrench is usually
• How are sockets sized?
• Which item is used to remove someone from electrical shock?
• Who monitors the downloading of electronic manuals from the NATEC website?
• Slip joints pliers are characterized by which features?
• NSN stands for?
• General Aircraft Information manuals include which of the following topics?
• Toxic materials can cause injury or death by poisoning through which routes?
• What does Note indicate?
• Which two numbering systems are currently in use for technical manuals?
• Who handles the requisitioning and automatic distribution of NATOPS manuals?
• Labels must be placed in which manner so they remain readable?
• Which statement best describes the relationship between Planned Maintenance System publications and Maintenance Requirements Cards (MRCs)?
• Which definition best describes Aerosols?
• Who is responsible for ensuring that applicable safety precautions are posted?
• Adapters are devices that change the drive size of the handle or socket; they may change from small to large or from large to small. They are available for all socket sets. In which directions can adapters change drive size?
• The acronym FATCOC is used to categorize HAZMAT. What does FATCOC represent?
• Needle nose pliers are primarily used to hold small objects and to do which additional tasks?
• What does WP 002 00 contain?
• The Work Unit Code identifies which element?
• The nine-digit segment of the NSN corresponds to which of the following?
• Which of the following are QA responsibilities?
• Diagonal pliers are primarily used for cutting what?
• Checklists within the PMS framework are best described as which of the following?
• Intermediate Maintenance Activity provides direct maintenance support to which organization?
• Which of the following is NOT among the four methods to prevent EMI?
• NATOPS manuals are issued by the direction of which organization?
• Which PPE category protects eyes and face?
• What are the two main types of maintenance?
• In the FATCOC framework, what does the letter T represent?
• Open wrench is used to loosen or tighten nuts and bolts in areas having
• What is RAC?
• The four socket handles are available in which drive socket sizes?
• Who is responsible for supervising the inventory?
• The standard (straight slot) screwdriver is designed for use with screws that have
• What is the purpose of the Central Technical Publications Library?
• What is one of the primary purposes of MIMs?
• In an IPB entry, which data item is included?
• What is the primary purpose of the Visual Information Display System/Maintenance Action Form (VIDS/MAF)?
• Who is the principal advisor to the CO on all Ground Safety matters?
• Who reviews change requests to the NAMP?
• Which of the following is NOT listed as a search field on the NATEC website?
• The TMINS is described as an improved system that consists of 13 alphanumeric characters called the Publication Identifier. What is the acronym TMINS an abbreviation of?
• NDI stands for which term?
• Which of the following is NOT listed as a WUC field used to complete fields in the MDS?
• The maintenance action form (MAF) control number (MCN) is a seven-character alphanumeric code assigned by the system that serves as a base for maintenance data reports and maintenance control procedures. It primarily tracks what through the maintenance process?
• What safety precaution is recommended when cutting with diagonal pliers?
• In conventional manuals, the Illustrated Parts Breakdown (IPB) may be contained as a section or developed as a separate manual.
• Which statement describes the role of VIDS/MAF when used with NALCOMIS?
• Which items are contained in an IPB manual?
• Which statement best describes the purpose of the open end on a combination wrench?
• The NAMP objective emphasizes continual improvement of readiness and which safety-related standard?
• Which screwdriver type has a cross point slot with a 45-degree tip and meets at a right angle?
• Damaged tools means never use damaged tools; what should you do?
• When is Shall used?
• Revision is a type of change. Which option lists a valid type of change?
• What is the function of the Naval Aeronautical Publication Index (NAPI)?
• Offset screwdriver is designed to be used when there is not sufficiently vertical clearance for a straight screwdriver because
• Before hazardous material can be ordered, where must it be listed?
• The responsibility of Material Control is
• Which item is included in the Monthly Maintenance Plan contents?
• AWP stands for Awaiting Parts and describes which condition?
• What is the primary purpose of the Hazard Communication Standard?
• Complete set means what about the tool set?
• Which maintenance type is done in hours, cycles, or landing, calendar or mileage basis?
• What is the purpose of a shorting bar?
• SM&R stands for what?
• Which feature is true about an Allen wrench?
• Which formatting styles are used for Technical Manuals?
• What does IETM stand for?
• Proper Use means using each tool for what?
• The IETM format is designed for use on which hardware and aircraft stages?
• What does WP 001 00 contain?
• A Correction is best described as?
• The OSHA Act of 1970 was designed to ensure that a safe and healthful workplace is provided for all personnel. What is the primary purpose of OSHA?
• Wrenches are used to exert a twisting force on
• For NATOPS flight and tactical manuals, which form should be used for change recommendations?
• Technical Manuals are used at what levels?
• Which FATCOC category letter represents Corrosive substances?
• In the Navy, SDSs are stored electronically on a CD entitled which system?
• One of the functions of MIMs is to allow signal tracing through the system. True or false?
• What characterizes Unscheduled Maintenance?
• What does CTPL stand for?
• How many characters are in the TMINS Publication Identifier (PI)?
• Compressed gas is defined by a specific pressure reading. Which example matches this definition?
• What do the last two digits of the WP number identify?
• On a Hazard Communication label, what basic information must be present regarding the material's identity?
• In the NAVAIR Conventional Numbering System, how many parts are there separated by dashes?
• The JCN length can be which of the following?
• What do the first three digits of the WP number identify?
• Who has final disposition authority over NAMP changes?
• The Maintenance Data System is also known as what?
• Tool Control Program (TCP) is designed to improve flight safety by doing what?
• What is the relationship between Hazard Communication labels and Safety Data Sheets (SDS)?
• If the exact size wrench or socket is not available, which tool is designed for versatility?
• Bar extensions are available in which size range?
• NAMP policy applies to which organizations?
• Which EMI prevention method involves connecting conductors to a common point to reduce stray voltage?
• What must the Maintenance Officer ensure before releasing aircraft or equipment if a tool is missing?
• Which statement best describes Operational Manuals?
• Which status describes an aircraft that cannot perform its missions due to lack of parts?
• What does the NATOPS Aircraft Specific Manual provide?
• Structure of the NAMP
• Socket wrenches are designed to transmit turning force from the handle to which component?
• Which statement is true about RAC relative to IRAC?
• Which activities are included under depot-level maintenance functions?
• Which list specifies the tools and equipment needed for an activity?
• Stow HAZMAT: In what kind of containers should HAZMAT be stowed?
• When would you use an adjustable wrench?
• What content is associated with WP 003 00 and higher?
• Which statement best defines HAZMAT?
• What is the purpose of the Technical Manual Numbering System codes?
• IMRL (Individual Material Readiness List) is defined as?
• In the NAVAIR Conventional Numbering System, what does the prefix identify?
• What is the primary goal of the Naval Aviation Safety program?
• What is IRAC?
• What does NAPI stand for?
• Which PPE category is described as protecting against falling or flying objects?
• Oxidizing agents are defined as materials that do what when combined with oxygen?
• Who is responsible for ensuring the accomplishment of tool box inventories?
• Who typically manages NATOPS manuals?
• What is the purpose of IRAC?
• Which option would not be a function of a socket wrench, based on typical use?
• What is the size of Maintenance Requirements Cards (MRCs)?
• What does Warning indicate?
• ICRL (Individual Component Repair List) describes?
• Good condition means tools are free of what?
• What does a complete tool set ensure in terms of readiness?
• Which librarian is responsible for paper-based manuals stored in NAVAIR binders?
• Maintenance Administration will provide
• Which group coordinates their services with the unit safety officer and supervises the division safety officer?
• The hinged handle is used to do which task?
• Phase inspections are defined as what?
• What is the primary purpose of the NATEC website?
• Which maintenance type is performed on the basis of hours, cycles, or calendar/mileage?
• Who approves the work which assigns a job control number, and assigns the work order to a work center?
• Unlabeled or repackaged containers shall be labeled using which form?
• Which group is required to inventory tools within the organization?
• Naval Air Depot facilities are described as what?
• What is the specified length range for standard straight-slot screwdrivers?
• A sub-volume is added when?
• What is the purpose of the Monthly Maintenance Plan (MMP)?
• Is RAC allowed to be issued without a prior IRAC?
• Where are paper-based manuals physically stored?
• NAVSUP 2002 serves as the only index authorized for requisitioning what?
• Maintenance Requirements Cards (MRCs) provide which of the following?
• The ratchet handle is used for what purpose?
• The TMINS is an improved and easy to use numbering system that has what primary purpose?
• PMRC stands for which phrase?
• TMINS stands for what?
• Which actions comprise the step to report a missing tool?
• Which statement best describes the role of NALCOMIS?
• In the FATCOC framework, which category letter represents Aerosol?
• In a Conventional Manual, which chapter would cover Alignment/Adjustment?
• If space limitations require storing incompatible materials in the same compartment, what separation distance must be maintained?
• When stowing HAZMAT, what is required about the container?
• Which QA responsibility helps ensure tools are accounted for during operations?
• Upkeep is performed by which personnel and managed by which custodians?
• Which statement is true about socket sizes and their drive end?
• The corrective action block describes what?
• The speed handle is designed for which operation?
• Which act established OSHA to ensure that a safe and healthful workplace is provided for all personnel?
• What does HAZMAT stand for?
• Depot level maintenance is characterized by which of the following?
• How is each paragraph numbered?
• What are the four types of socket handles listed?
• What is the CV NATOPS Manual (NA 00-80T-105) used for?
• What must be etched on each tool to ensure accountability?
• CTPL stands for which title?
• Work Package Manual is described as better than conventional in which aspects?
• Which of the following is explicitly listed as a TCP benefit related to tool management?
• Which safety equipment items are typically found in a work center?
• A Mishap is defined as which of the following?
• How should incompatible chemicals be stored?
• Within the Work Package Manual, what does TPDR stand for?
• Operational Manuals focus on what?
• SDS are available in two formats. Which pair are routinely provided?
• What does the NAVAIR Conventional Numbering System consist of?
• How should missing tools be treated?
• Adjustable pliers are used primarily when what situation occurs?
• When should the inventory be supervised?
• Reed and Prince (Cross point) screwdriver features
• In the NAVAIR conventional numbering system, additional numbers may be added to indicate what?
• What is a storage requirement for hazardous materials (HAZMAT)?
• In the TMINS example, which suffix value is listed first for classification?
• Depot-level maintenance work must be performed in what type of facility?
• The Commanding Officer is responsible for which safety-related requirement?
• Cannon plug pliers are designed for use with which type of material due to their rubber pads?
• Upkeep is performed by which personnel and managed by which custodians?
• Universal joints allow turning a nut or bolt with the handle at an angle. They are available in which drive sizes?
• EMI can affect which systems?
• Special inspections are conducted under what circumstances?
• Which entity coordinates the investigation for lost or missing tools?
• Which item is listed as safety equipment in the work center?
• In organizational maintenance activities, maintenance control will
• Hazardous Waste (HW) is defined as which of the following?
• After a mechanic files a lost tool report, who is notified?
• What is the purpose of the Work Unit Code (WUC) manual?
• NAMP provides
• Periodic Maintenance Information Cards (PMIC) are used for tracking components or assemblies with which characteristic?
• Which statement about the IETM maintenance manuals is true?
• What best describes an Intermediate Maintenance Activity?
• Which WP sections are included in the standard Work Package Manual organization?
• Phillips screwdrivers have a tip designed with what angle?
• Duckbill pliers are used in confined areas to hold objects where fingers cannot be used. What is another common use?
• PMS publications consist of which of the following sets?
• The Hazard Communication Standard requires containers to be labeled to identify the chemical they contain, the hazards they present, and what other information?
• What is a second or subsequent edition that completely replaces the old manual called?
• Which command uses the conventional numbering system?
• PMS publications provide the basis for planning, scheduling, and execution of scheduled maintenance requirements. Which item is an example of a PMS publication?
• WUC manual is used to enter maintenance data into which system?
• Acceptance inspection is performed at what time?
• Bar extensions are designed to extend the distance from the socket to the handle. The sizes range from 2 inch to 24 inch. Bar extensions are used to extend distance between which two parts?
• Corrosive substances are best described as what?
• Periods in manual numbers are used when a manual is volumized due to its size.